UPVC Replacement Door Handles
The handles on your doors get worn out with time and require to be replaced. When doing this it is essential that the new handles match the critical dimensions of the old handle.
The three measurements to be inspected are the top screw's position the lever and key hole dimensions. Refer to the size guide for assistance with this.
Inline Lever/Lever
A lever handle is a modern door handle designed to suit new or replacement doors. This style of handle is available in a variety of designs and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made of tough materials and are ideal for doors with multiple points that require a robust design. The handles are inline and they use the same spindle and screws to fix them. They can be easily mounted on new or existing uPVC/Composite door.
The sprung lever design allows the handle to be placed and angled to ensure a comfortable experience and is suitable for all users. The handle has been endurance-tested to 200 000 cycles. This ensures that the quality of finish and performance will last for a long time. door handle repair near me sprung lever is also adjustable to fit a wide range of locks. This is particularly beneficial for narrower door frames where the cylinder is further back. A lever that is shorter can be used for doors with a latch that can be opened by the thumb on the inside.
Lever Pad
The lever pad upvc handle is distinct from the lever handles commonly found on doors. These handle types are either operated by a single spindle or by two spindles inline or offset. They are commonly used on UPVC doors with double glazing. They come in a range of finishes and variations.
The handles are available in a variety of finishes, including White Chrome and Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.
All of the UPVC handle lever pad styles are supplied with the spindle and screws that allow them to be fitted on any new or existing uPVC door. The 211mm backplate fixing centres permit a bigger size of handle which can be beneficial in replacing a defective or worn multi point door lock mechanism. These handle levers have springs, which eliminate the problem of door handles that sag out of horizontal position when not in use.
When selecting a replacement UPVC handle and spindle, it is crucial to match the PZ dimensions of both the multipoint lock and the uPVC door. This measurement is also referred to as the handle centre or 'cylinder centres and is an essential aspect in ensuring that you have the appropriate handles.
Once you have the proper PZ size you will then be required to make sure that the handle lever pads and push pads are a suitable shape to fit the American with Disabilities Act (ADA) compliant handles that you need for your doors. They are usually of a round or square shape, with an internal lever and an external push pad.
The majority of UPVC Lever Pads we offer are spring-loaded. This means that they return to a horizontal position after they are not in use, rather than hanging and possibly securing to the frame. This prevents drafts and cold air from entering a property. The majority of UPVC lever pad style handles are available in left and right handed versions that allow them to be placed on either side of doors.
Euro Cylinder
Cylinder locks can be found on uPVC and other types of doors. They operate by using a key to unlock a cylinder case which is then revealed with pins that can be aligned to those inside the lock body, allowing them to turn a revolving cam, thus opening the door. Euro cylinders are available with up to six pins. Doors that are internal and external require different levels of security.
Selecting the right cylinder for your needs is essential; it depends on the way your door and handle are utilized. External doors, for example, should be fitted with higher security cylinders, whereas doors inside can be secured using an ordinary cylinder. Some cylinders have extra features that increase security, for instance, anti-drill or anti-bump properties.
A euro cylinder should be measured accurately to ensure it is the right size for your door. The cylinder must be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn in the event that one is present. If you cannot measure with the lock in position, you can remove it. It is important to not have a cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.
The design of the latest cylinders has anti-drilling and bump resistance features. They are designed to decrease the chances of an attack by causing the cylinder to rotate in a different direction. This can to deflect an attack and keep your door safe.
Certain cylinders are constructed to withstand snapping. This is a more frequent type of attack on cylinders, where the break line inside the lock is targeted with a special tool to snap off the front of the cylinder to allow the door to be opened. This is a lot faster and easier to achieve than opening the door with multipoint locks and leaves no evidence of a burglary, which could hinder an insurance claim.
Spring Cassette
The spring cassette is located within the base of your door handle's backplate, providing a spring solution to return the multipoint lock handles back to their rest position after using. In the past, a lot of handles didn't have a spring built into them, and without it they tend to droop or drop when the locking mechanism is removed. The addition of this simple element is one of the best ways to correct this issue and is an excellent way to stop your doors made of upvc from getting stuck in the open or closed position, since they are not always easy to close manually.
These spring cassettes have been specifically designed to be used with multipoint locks that are sprung They will not work with non-sprung multipoint handles. You will need to have a hole specifically cut in your backplate to allow these to fit (please look at the image for a technical diagram). They are a replacement for broken or missing cassettes within the backplate of the door handle for many kinds of uPVC doors. They have an elongated square that accommodates an 8mm spindle and they are supplied individually.
These spring cassettes are an excellent value for money solution to the issue of door handles that are sliding. They are simple to install and will extend the life span of your uPVC doors. Please contact our team for more information about our wide range of uPVC accessories and spares. We are always available to offer professional advice and assistance you.